Several types of brazed plate heat exchangers

Post time:

2020-12-17

Brazed plate heat exchanger is a new type of high-efficiency heat exchanger made of a series of metal sheets with a certain corrugated shape stacked by brazing process, forming a thin rectangular channel between various plates, heat exchange through the plates, it is compared with the conventional shell and tube heat exchanger, in the same flow resistance and pump power consumption, its heat transfer coefficient is much higher, in the applicable range to replace the shell and tube heat exchanger The trend is to replace shell and tube heat exchangers in the applicable range.

Inter-wall heat exchanger with plates to form the heat transfer surface, this type of heat exchanger compact structure, the unit volume of the heat transfer area is larger, the main types are.
① spiral plate heat exchanger made of two parallel metal plate rolled to maintain a certain spacing, cold and hot fluids are in the metal plate on both sides of the spiral channel flow, this heat exchanger heat transfer coefficient is high (about 1 to 4 times higher than the shell and tube heat exchanger), the average temperature difference (because the cold and hot fluid can be made completely counter-current flow), the flow of resistance is small, not easy to scale; but maintenance difficulties. The use of pressure does not exceed 2MPa.

② flat plate heat exchanger by a certain shape of the corrugated sheet and sealing gasket laminated to each other and assembled with the frame, cold and hot fluids flow through the corrugated plate on both sides of the flow channel, the plate for heat transfer, corrugated plate is usually 0.5 ~ 3mm thick stainless steel, aluminum, titanium, molybdenum and other thin plates made of punching, flat plate heat exchanger has the advantage of high heat transfer coefficient (about 2 ~ 4 times higher than shell and tube heat exchanger) The heat exchanger can be easily disassembled and cleaned, and the number of plates can be increased or decreased to adjust the heat transfer area. Operating pressure usually does not exceed 2MPa, the operating temperature does not exceed 250 ℃.