What are the advantages of plate heat exchangers?

Post time:

2023-02-18

In fact, the main reason for its popularity is its ease of cleaning, light weight, small footprint, low price

Loved by many industries, next we will come for you, a specific introduction it.

Cleaning convenience plate heat exchanger pressure plate removed, you can loosen the plate bundle, remove the plate, mechanical cleaning.

Simple to change the heat exchange area or process combination only need to add (or reduce) the plate, you can reach the need to add (or reduce) the heat exchange area.

Light weight plate heat exchanger plate thickness of only 0.6 ~ 0.8mm, shell and tube heat exchanger heat exchanger tube thickness of 2.0 ~ 2.5mm; shell and tube heat exchanger shell than the plate heat exchanger layout much heavier.

In the case of completing the same heat transfer mission, the plate heat exchanger requires a smaller heat transfer area than the shell and tube heat exchanger.

Small footprint plate heat exchanger layout compact, unit volume of heat transfer area for shell and tube heat exchanger 2 to 5 times, but also unlike shell and tube heat exchanger as the need to set aside the maintenance site for extraction control.

Therefore, to complete the same heat transfer mission, the plate heat exchanger covers an area of about 1/5 to 1/10 of the shell and tube heat exchanger.

High heat transfer coefficient shell and tube heat exchanger layout, from the strength aspect is * good, but from the heat transfer point of view is not ideal.

Because of the fluid in the shell process when the activity of the folding plate - shell, folding plate - heat exchanger tube, control - the bypass between the shell.

Through these bypasses, the fluid does not fully participate in heat transfer.

Plate heat exchanger, on the other hand, there is no bypass, and the corrugation of the plate can make the fluid turbulent at a smaller flow rate.

Therefore, the plate heat exchanger has a high heat transfer coefficient, which is usually 3 to 5 times higher than that of shell and tube heat exchangers.