How to distinguish between brazed heat exchanger and plate heat exchanger
Post time:
2023-02-18
Recently some of the friends of the purchase of heat exchangers on the plate and shell heat exchanger, brazed heat exchanger understanding and will have a blind spot, thought the same, but in fact the difference is great. Both are widely used heat exchangers , what is the comparison between them.
Heat exchanger manufacturers for us to explain in detail!
Plate and shell heat exchanger using a fully welded process, the overall sealing performance is good, can withstand high temperatures and high pressure;
Due to its good performance of the fully enclosed seal, its range of applications and adaptability to a variety of media is particularly strong.
The plate spacing is large, up to 3.5~6mm, and the internal circulation of the medium is not easily blocked;
Its advantage is that it can be disassembled, easy to clean and easy to service.
In contrast: brazed heat exchanger using copper brazing, high temperature and high pressure stress and vibration is easy to desoldering, resulting in leakage;
The internal heat exchange process of brazed heat exchangers has direct contact with copper.
It is well known that copper has poor corrosion resistance, which leads to a small range of brazed heat exchanger applications.
The plate spacing is only 2.2~4mm, which is easily blocked and affects the heat transfer efficiency.
It is an integral unit and cannot be disassembled, so if it is contaminated, it cannot be cleaned.
In contrast, the advantages of plate and shell heat exchanger *plus**, which is the reason why it is widely used.
high overall sealing, high safety performance, high temperature and high pressure resistance.
More economical and reasonable configurations can be found for different media and operating conditions.
